Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
Assembly
4
Electrical connection
1. Mark holes with drill template (back side of the
The electrical connection is limited to inserting the
packaging)
cables into the appropriate terminals of the charge
regulator.
E
The electrical installation is carried out as per the
following illustrations.
Please follow the connection sequence and
establish the connections with both fuses removed,
i.e. currentless.
Make sure the screws of the terminals are tight, in
order to prevent transient losses and a
consequential warming.
1. Remove both fuses
2. Do not fully screw in the
upper two screws
3. Engage regulator
on screws
4. Tighten lower screws
49
50
Assembly
Electrical connection
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
