Master Lock MLD08EB Gebrauchsanweisung Seite 2

Thank you for choosing Master Lock to store all your important documents and valuables. We hope
that this product will help you stay organized and provide you with the peace-of-mind of knowing
know the things most important to you are protected.
WARNING
YOUR SAFE IS ONLY PART OF YOUR TOTAL SECURITY PROTECTION.
Master Lock recommends that you store your safe in a closet, office, basement, bedroom or
any other location that is convenient for you but out of direct line of sight from prying eyes. The
location of the safe does not affect the safe's ability to protect your valuables inside.
Opening Your Safe For The First Time.
1
2
3
How to Program Your Safe:
NOTE: Some select models come with a biometric fingerprint scanner located to the left of the
digital keypad. These safes allow the user to program fingerprint scans for a primary and secondary
user as well as a digital user code. All other safes can ONLY be programmed with a digital user
code.
NOTE: All safe models initially work with the safe code 1-2-3-4-1. It is therefore important to
re-program your safe with a new user code for maximum security.
1
Pull out battery pack keeping batteries connected to wires.
2
Find the button located behind the battery pack.
Insert key and turn.
NOTE: DO NOT lock key inside safe- this is an override key and
will open the safe in the event that your batteries are too weak to
operate your safe.
Remove the battery pack cover and insert 4 AA alkaline batteries.
NOTE: Do not use rechargeable batteries or any other type of
non-alkaline battery. Do not mix old and new batteries. Do not mix
alkaline and standard batteries.
Replace the battery cover.
2