Read the product description before installing the unit. Ensure
that the product is suitable for your application without any
restrictions.
Non-adherence to the operating instructions or technical data
can lead to personal injury and/or damage to property.
In all applications check compliance of the product materials
(see Technical data) with the media to be measured.
Controls and indicating elements
1
4 x LED gren
2
1 x LED yellow
4-digit
3
alphanumerical
display
4
Set button
5
Mode / Enter button
20
Safety instructions
1
Mode/Enter
display of parameters and parameter values.
Set
Lighting LED = set display unit.
Switching status;
lights if output 1 has switched.
Display of the system pressure,
Setting of the parameter values
(scrolling by holding pressed;
incremental by pressing briefly).
Selection of the parameters and
acknowledgement of the parameter values.
2
3
4
5