3M X31 Benutzerhandbuch Seite 115

3M™ Digital Projector X31/X36/X46
Command Control via the Network (continued)
Command control settings
[TCP #23]
1. Command format
2. Response code / Error code
(1) ACK reply : 06h
(2) NAK reoly : 15h
(3) Error reply : 1Ch + 0000h
(4) Data reply : 1Dh + xxxxh
(5) Authentication error reply : 1Fh + 0400h
[TCP #9715]
1. Command format
The commands some datum are added to the head and the end of the ones of
Header
0×02
[Header]
[Data Length]
[RS-232C commands]
[Check Sum]
This is the value to make zero on the addition of the lower 8 bits from the header
to the checksum.
[Connection ID]
Random value from 0 to 255 (This value is attached to the reply data).
NOTE
other code.
© 3M 2010. All Rights Reserved.
( 10).
( 10).
( 10).
( 10).
13 bytes 1 byte 1 byte
( 10).
13