3. Response code / Error code
(1) ACK reply : 06h
(2) NAK reply : 15h
returns the error code.
In such a case, check the sending code and send the same command again.
(3) Error reply : 1Ch + 0000h
(4) Data reply : 1Dh + xxxxh
the responce code and 2 bytes of data.
NOTE
manual for each devices, and connect them correctly with suitable cables.
command or data.
code.
when the lamp is lit. Ignore this data.
When the data length is greater than indicated by the data length code, the
code to the computer.
10
3M™ Digital Projector X31/X36/X46
RS-232C Communication (continued)
© 3M 2010. All Rights Reserved.