Yamaha mLAN8P Bedienungsanleitung Seite 32

Mode Functions
[Wordclock Source]
This parameter is used to select the method of setting the mLAN8P's word clock. If you have
selected "Manual," use the [Device/Nickname] parameter to specify the name of the device
(on the mLAN) that you wish to assign as the word clock master.
Value: Internal 44k, Internal 48k, External Coaxial/Oprical, Auto,
Group 1 Master, Manual
When the internal clock (44.1k) is selected:
NOTE
The selected value flashes a few times and the system automatically displays the confirmation
message.
To confirm the changes, press the [+1/ENTER] button. To cancel the operation, press the [–1/
EXIT] button.
[Group 1 Wordclock Master]
You can assign one device as the word clock master and the rest of the devices as the slaves.
Press the [+1/ENTER] or [–1/EXIT] button to select the Device/Nickname of the device (on
mLAN) that you wish to assign as the word clock master.
The Device/Nickname of the selected device flashes a few times, then the mLAN8P displays
the following confirmation screen.
To confirm the changes, press the [+1/ENTER] button. To cancel the operation, press the [–1/
EXIT] button.
32
The default setting is "Auto." If you have selected "Auto" or "Manual," the
name of the master device appears.