Specifications - Yamaha mLAN8P Bedienungsanleitung

Specifications
mLAN : IEEE1394 High Performance Serial Bus
Sampling rate : 44.1kHz, 48kHz
Analog I/O : Analog In(A/D Converter)
Functions : Mixer Input (x12)
: Output
: Effect
Controls : INPUT VOLUME, power switch (PUSH ON/STANDBY), PHONES VOLUME,
Jacks : PHONES, ANALOG IN (1/L, 2/R), ANALOG OUT (1/L, 2/R), MIDI IN,
Display
Top panel : LCD (24 x 2 lines + 2 digits [7 segments], back-lit), LOCK LED (x2), DATA LED,
Rear panel : mLAN 1/2/3 LED, ACTIVE LED, RT/ERR LED
Power supply : Power supply adaptor PA-5C
Power consumption
: 17 W
Dimensions : 220(W) x 206(D) x 71(H)[mm]
Weight : 2.0kg
Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp.
reserves the right to change or modify products or specifications at any time without prior notice.Since spec-
ifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.
38
Data Rate S200, Isochronous Resource Manager capable, Bus Manager capable,
Connection Manager
Conforms to IEC61883-6 Audio and Music Protocol
Digital Audio 8in/8out, MIDI 2in/1out
Frequency Response : 5Hz-20KHz(fs=44.1KHz), 5Hz-21KHz(fs=48KHz)
Analog Out(D/A Converter)
Frequency Response : 5Hz-20KHz(fs=44.1KHz), 5Hz-21KHz(fs=48KHz)
Dynamic Range 95dB(JIS-C)
THD Less than 0.003%(0dBm)
Maximum Output +3dBV(+5dBm)
Link (*1), ATT, Gain (*1), Phase, Delay (*2), EQ(4Band) (*2), Dynamics (*2), AUX
Send 1, 2 (*1), Pre/Post 1, 2, Channel on/off (*1), Meter (*1), Pan (*1), Fader (*1)
Effect Return (level, pan, mute), AUX Master 1, 2 (*1), AUX Link (*1), Level (*1),
Balance (*1)
Effect type/parameter
*1 These parameters can be set on the mLAN8P.
*2 Up to eight channels
Mode buttons (MIDI/UTILITY, MIXER 1 & 2), Channel/Function buttons (x8),
PAGE button ( /
CONTRAST knob
MIDI OUT (A, B), COAXIAL IN/OUT, OPTICAL IN/OUT, SERIAL I/O,
mLAN IEEE1394 (1, 2, 3), DC IN
RT/ERR LED
), +1/ENTER button, –1/EXIT button, VALUE dial,