Acoustic Signal; Interface; Date, Time - KERN YKT-01 Bedienungsanleitung

6.10

Acoustic signal

Here the acoustic signal can for all functions be switched on or off.
There are 3 acoustic signals available:
1 x short for measuring value transfer
1 x long for deleting measuring value/measuring list
3 x short for Error messages
After having made the selection the following appears on the display:
With can
▲ ▲ ▲ ▲ ▲
▼ ▼ ▼ ▼ ▼
6.11

Interface

The desired interface can be selected. After having made the selection the following appears
on the display:
▲ ▲ ▲ ▲ ▲
▼ ▼ ▼ ▼ ▼
With
The interfaces referred to as:
are programmed with fixed parameters. For suitable hand measuring instruments and data cables
see Appendix B.
The Interfaces referred to as:
have been assigned the appropriate parameters. For suitable hand measuring instruments and
data cables see Appendix B.
6.12

Date, Time

The data and time can be set here.
After having made the selection the following appears on the display:
STAT
With Date and Time can be edited, see chapter 7.2
62
A c o u s t ic S i g n a l
A c o u s tic S i g n a l
I n t e r f a c e
440/572/C/DKB
- 440/572/C/D/KB,
- 770/GS/GJ
- AR/PR
- < 47x/EG/EW >
- < ABS/ABJ>
- < ITx/FTx >
D a t e , T i m e
( S t a t )
on
be selected.
off
can be switched.