Ascii - Printer - KERN YKT-01 Bedienungsanleitung

ENTER
With the time-controlled automatic data transfer is terminated
and goes back to
With can
▲ ▲ ▲ ▲ ▲
▼ ▼ ▼ ▼ ▼
with ENTER can be terminated the time-controlled automatic data transfer function.
Note:
During the time-controlled automatic data transfer the following keys are locked:
TOL., AC, C, STAT and the cursor keys.
The keys that remain operational are: ON/OFF, ENTER, FEED and DATA.
6.9 ASCII – Printer
After having made the selection the following appears on the display:
DATA
With one is taken to the ASCII receiving mode:
The cursor flashes at the top left hand corner position of the display. The commands Xon /
Xoff are active. Xon is sent after Xoff has been sent. The memory size amounts to 50 Byte. A
maximum of 32 characters can be seen in the display. A received CRLF returns the cursor to
the top left hand corner positon.
AC
With can the whole display be deleted.
All possible characters will be printed.
ENTER
With returns one to the following display:
A u t o . D a t a
( S t a t )
A u t o . D a t a
A S C I I - P r i n t e r
( S t a t ) ( D a t a )
_
A S C I I - P r i n t e r
( S t a t ) ( D a t a )
y e s
be selected and
n o
61