Introduction - KERN YKT-01 Bedienungsanleitung

1.

Introduction

Prior to first use of the Statistic Printer YKT-01, we recommend that you read these operating
instructions very carefully.
The statistics printer YKT-01 is fitted with a thermal printing unit.
It has an interface for connecting electronic scales.
Range of application
Incoming and outgoing inspection, production, quality assurance
Specifications
• Up to 999 measured values can be stored (Logger-function)
• Two-line, alphanumerical display à 16 characters to display settings or error and status
messages in dialogue mode
• Operation with mains supply or with optional 6 Standard accumulator batteries AA 1,2 V
(accumulator batteries cannot be loaded via the delivered mains supply)
• High speed print, print-out on thermopaper
• No loss of data in case of voltage loss
• Possibility as Interface to RS 232C
• multilingual (German/French/English)
Safety and general notes
• Make sure that the electrical connection data prescribed for the plug-in charger are
observed.
• Connect and disconnect data in-and output only when the printer is switched off
or disconnected.
• Protect the instrument against humidity, dust and aggressive media.
Keep the printer mechanism clean from dust by wiping it with a dry cloth from time to time.
• No connection of data cables with a length of more than 3 m.
• In the event of optional use of accumulators, dispose of used accumulators in accordance
with regulations.
• Storage temperature: -10 °C to +50 °C
• Operating temperature: +5 °C to +40 °C
The Statistic Printer YKT -01 is in comformity with EU-Standards 89/336/EWG
concerning electromagnetic compatibility and the directive on low voltage 73/23/EWG.
Should you have any questions regarding the instrument, please do not hesitate to contact us.
42