KERN YKT-01 Bedienungsanleitung Seite 47

- Guide paper through the underside of the paper feed (c) until the paper appears.
- Arrange paper, ensuring it is straight.
- Close the clamp (d).
- Insert the paper roll on the roller locator in the printer.
- Pressing the FEED key enables a paper feed, this depends on how long this key is
pressed. The paper end should protrude 3-5 cm over the printer head.
- Slide the end of the paper roll through the slot in the printer cover (e) and replace the
printer cover onto the housing (f).
- The Statistics Printer YKT-01 is now ready to print.
Automatic Paper feed
- Clamp (d) of the printer is closed.
- Place the new paper roll on the table behind the printer and unwind ca. 15 cm.
- Switch the unit on. On the display appears in the Start menu the following command
„Load paper!".
- Guide paper through the underside of the paper feed (c) until the paper is
automaticlly pulled through.
- Open clamp (b) of the printer and arrange the paper.
- Close clamp (d).
- Insert the paper roll on the roller locator in the printer.
- Slide the end of the paper roll through the slot in the printer cover (e) and replace the
printer cover onto the housing (f).
- The Statistics Printer YKT-01 is now ready to print.
47