Herunterladen Diese Seite drucken

Technische Daten; Technical Data; Servicehinweise; Service Hints - Grundig VERTIGA UMS 4600 DEC Bedienungsanleitung

Werbung

GRUNDIG Service

Technische Daten

System
Spannungsversorgung:
Betriebsspannung ................................................................... 230V~
Netzfrequenz ........................................................................ 50/60Hz
Max. Leistungsaufnahme ........................................................... 28W
Leistungsaufnahme in Stand-by ................................................ ≤5W
Verstärkerteil
Ausgangsleistung:
Sinusleistung .......................................................................... 2 x 5W
Musikleistung ......................................................................... 2 x 8W
Empfangsteil
Empfangsbereich:
FM .......................................................................... 87,5 ...108,0MHz
MW ........................................................................... 522 ... 1620kHz
CD Teil
Frequenzgang .......................................................... 100Hz ... 15kHz
Geräuschspannungsabstand (bewertet) ................................. ≥60dB
MP3-Features
Alben und Files ................... Max. 200 Alben, max. 500 Files pro CD
File System/File Management ............ ISO 9660 Level 1 kompatibel
Abmessungen
Abmessungen Gerät B x H x T .......................... 170 x 172 x 250mm
Abmessungen Lautsprecher B x H x T .............. 128 x 255 x 148mm
Gewicht
Gewicht Gerät ........................................................................... 2,4kg
Gewicht pro Lautsprecher ........................................................ 0,8 kg

Servicehinweise

Achtung: ESD-Vorschriften beachten
Vor Öffnen des Gehäuses Netzstecker ziehen.
CD-Laufwerk
Bei Ausbau der Lasereinheit oder der Servo-Leiterplatte muß vor
Abziehen der Steckverbindung eine Schutzlötstelle auf der Leiter-
platte der Lasereinheit angebracht werden, um eine Zerstörung der
Laserdioden durch statische Aufladung zu vermeiden.
Beim Einbau einer neuen Lasereinheit (CD-Laufwerk) muß nach
Einstecken der Steckverbinder die werkseitig angebrachte
Schutzlötstelle entfernt werden!

Technical Data

System
Power supply:
Operating voltage ................................................................... 230V~
Mains frequency ................................................................... 50/60Hz
Max. power consumption .......................................................... 28W
Power consumption in stand-by ................................................. ≤5W
Amplifier unit
Output:
Sine wave power .................................................................... 2 x 5W
Music signal power ................................................................ 2 x 8W
Receiver unit
Reception range:
FM .......................................................................... 87.5 ...108.0MHz
MW ........................................................................... 522 ... 1620kHz
CD unit
Frequency response ................................................ 100Hz ... 15kHz
Noise-voltage ratio (wtd.) ........................................................ ≥60dB
MP3 features
Albums and files: ............... Max. 200 albums, max. 500 files per CD
File system/file management .............. ISO 9660 Level 1 compatible
Dimensions
Device dimensions W x H x D ........................... 170 x 172 x 250 mm
Loudspeaker dimensions W x H x D .................. 128 x 255 x 148mm
Weight
Device weight ............................................................................ 2.4kg
Weight per loudspeaker ............................................................ 0.8kg

Service Hints

Attention: Observe the ESD safety regulations
Disconnect the mains plug before opening the set.
CD Mechanism
When removing the Laser pick-up or the Servo PCB, the Laser pick-
up PCB must be provided with a protective soldered joint before
unplugging the connectors to avoid damage to the Laser diodes by
static charges.
When inserting the new Laser pick-up (CD drive mechanism) the
soldered joint fitted at the factory must be removed after the
connectors are plugged in.
Schutzlötstelle
Protective soldered joint
1 - 3
VERTIGA UMS 4600 DEC

Werbung

loading

Diese Anleitung auch für:

Glr1200