Mem Edit" - Deleting A Value In Memory And Enter A New Value - Gossen MAVOLUX 5032C USB Bedienungsanleitung

4.4.3 „Mem-Edit" – Deleting a value in memory and entering a new value
Hold
Mem
10
The Mavolux offers the function „Mem Edit" for correcting a
stored value in the memory. Measure again, press the Hold
key and the new value is locked. Then by pressing one of the
range keys, you can browse through the memory.
At the memory location to be
corrected press now the key
Mem. In the display the
measurement value stored is
indicated for a few seconds
alternating with the number of
the memory location.
Subsequently the MAVOLUX
will return to measuring
function.
Gossen Foto- und Lichtmesstechnik GmbH