Functioning Of The Mavolux; Preparation; Duration Of Display - Continuous Operation - Gossen MAVOLUX 5032C USB Bedienungsanleitung

3

Functioning of the MAVOLUX

3.1

Preparation

First remove the snap-on cover and open the battery compartment at the back of the meter. Insert the
battery included with the meter (1.5 V size AA, IEC LR6) in the battery compartment.
Care should be taken to place the battery correctly according
to the polarity indications "+" and "-" in the battery compartment.
When the battery warning symbol (
the battery must be replaced.
The values in the measurement data memory and also the preset
individual values will be maintained, even when the battery is changed.
3.2 Duration of Display – Continuous operation
If for approx. 4 minutes none of the keys of the MAVOLUX is pressed, the instrument will be turned off
automatically. During the last 4 seconds before automatic switch off an acoustic signal will sound. By
pressing any one of the keys, you can override the Automatic Switch Off.
When the instrument is switched off, the values stored in the data memory and also the preset
individual values will be maintained.
You can override the automatic switch-off, when switching on the instrument and simultaneously keep
the HOLD key depressed. The measuring unit „lx / fc" in the display will blink and indicate that the
Continuous Operation Mode is on.
6
) appears in the display,
Gossen Foto- und Lichtmesstechnik GmbH