Audiotec Fischer HELIX G FIVE Handbuch Seite 13

Connectors and control units
Line Input
1
RCA inputs for connecting pre-amplifier
signals.
Input Mode
2
Switch to route input signals to respective
amplifier channels.
.
Highlevel Input
3
Highlevel speaker inputs for connecting a
factory radio or an aftermarket radio without
pre-amp / line outputs.
Input Level
4
Control for adjusting the input sensitivity of
the Line and Highlevel Inputs.
HPF
5
Control for adjusting the highpass filter from
15 to 4,000 Hz.
GND
11
Connector for the ground cable (negative
terminal of the battery or metal body of the
vehicle).
REM
12
Connector for the remote cable.
+12 V
13
Connector for the +12 V power cable of the
positive terminal of the battery.
1 2
3
11 12 13 14
4 5 6 7 8
4 5 6 7 4 10
X-Over
6
Switch for activating the filters for each
channel pair.
LPF
7
Control for adjusting the lowpass filter of the
channels C and D from 40 to 4,000 Hz resp.
of the subwoofer channel from 50 to 250 Hz.
Subsonic
8
Control for adjusting the subsonic filter of the
subwoofer channel from 15 to 50 Hz.
Remote
9
Input for connecting the included bass level
remote control.
Bass Boost
10
Control for adjusting the bass boost on
subwoofer channel from 0 to 12 dB.
16
15
Fuse
14
Input fuses - 3 x 40 Ampere.
Power & Protect LED
15
This LED indicates the operating mode of the
amplifier.
Output Channels
16
Speaker outputs for connecting speaker
systems and a subwoofer.
9
13