Melitta CAFFEO SOLO&milk. Bedienungsanleitung Seite 58

• Turn the valve switch (Fig. A, no. 11) clockwise to the stop to open the
valve.
• The valve symbol
steam pipe.
• When water is no longer dispensed and the symbol for the valve
illuminated, turn the valve switch anti-clockwise to the stop to close the
valve.
→ Subsequently, the standby symbol
illuminated. The device is ready for operation and water hardness is
automatically set to hardness level 1.
Notes
– The Melitta
period of time. We therefore recommend storing the Melitta
filter in the refrigerator in a glass of water when the appliance will not be in
use for extended periods.
– After inserting the Melitta
be washed out of the filter the first time the appliance is rinsed out. This
can cause the rinse water to appear slightly grey in colour. Subsequently
the water will again be clear.
56
Heft_SoloMilk_EU_2_3.indd 56
flashes. Water will flow into the vessel under the
Claris water filter should not remain dry over an extended
® ®
Claris
® ®
and bean symbols
water filter, excess active charcoal will
is
will be
Claris water
® ®
09.04.2014 10:58:00