Grundig RCD 1445 USB Handbuch Seite 23

CD MODE
________________________________________________________________
Creating a track memory
You can create a track memory of up to 20 tracks for
the current CD in any order you choose and then play
them back in that sequence. A track may be stored
more than once. Program is only possible in the stop
position.
Selecting and storing tracks
1 Press »PROG/MEM« to call up the function.
2
Select the track by pressing »DOWN « or »UP
3 Press »PROG/MEM« to save the track.
4 To store more tracks, repeat steps 2 to 3.
Playing back a track memory
1 Start the track memory by pressing »
– P layback begins with the first programmed file or
track.
2 MONO/ST.« to end playback.
Press »■
3 To play the track memory again, press
»PROG/MEM« and afterwards »
Changing the track selection
1 In stop mode, keep pressing »PROG/MEM« until
the number of the track you want to replace appears
in the display.
2 Select the number of the new track by pressing
»DOWN « or »UP
3 Press »PROG/MEM« to save the new track.
Adding tracks
1 In stop mode, press »PROG/MEM« until the preset
number shown in the display is zero.
2 Select the number of the new track by pressing
»DOWN « or »UP
3 Press »PROG/MEM« to save the new track.
e
II«.
e
II«.
«.
«.
Deleting the track memory
The device must be in the stop position.
1 Press »OPEN/CLOSE« to open the CD compart-
ment
or
press »■ MONO/ST.« while programming.
«.
23
ENGLISH