Maintenance And Service; Technical Data; Fault-Finding And Rectification - Schwamborn ES 330 Bedienungsanleitung

9. Fitting shampoo accessory
ES 430/ EP 430-2)
(only for the
1. Place the tank on the lower control handle holder
2. Fix it in place with the upper holder
3. Attach the cable to the left hand lever on the
control handle
4. Connect the liquid hose to the tank and insert it
to the side of the motor
5. Mount the shampooing equipment and the fan in
the tank
6. Attach the shampoo nozzle under the machine

10. Maintenance and service

1. Always withdraw the
beginning servicing work.
2. Regularly check the mains plug and connecting
cable for functional safety.
3. Only trained electricians may work on electrical
components.
4. Clean the accessory
5. Regularly clean the spray device with water after
use.
6. Regularly wipe down the machine with a damp
cloth.
7. After work:
•
Do not leave the machine resting on the
accessory
•
This prevents them from becoming distorted
•
Distortions cause uneven running
•
Check the dust bag and filter

11. Fault-finding and rectification

1. The machine does not start
Cause
Mains plug not inserted
Motor overload protection
has switched the motor off
Faulty connecting cable
On/off switch faulty
Faulty capacitor
2. Machine runs roughly
Cause
Dirty brush, pad or working
tool
Working tool not centred
Working tool worn out
mains plug before
Remedy
Insert properly
Let the machine cool
down and start it again
Exchange
Exchange
Exchange
Remedy
Clean tools
Centre it again
Exchange

12. Technical Data

Type
Voltage V
Frequency Hz
Protection class
Protection IP
grade
Drive motor W
Brush - ø mm
Pad - ø mm
Rotation speed r.p.m.
Working g/cm²
pressure
Torque Nm
Cable length m
Noise level dB(A)
Weight kg
Vibration m/s
CE testing
10
ES 330 ES 430 EP 430
220-240 220-240 220-240
50 50 50
I I I
44 44 44
600 1200 1600
330 430 430
330 430 430
165 165 400
37 37 40
32 46 37
12 12 12
58 58 58
22 34 37
2,5 2,5 2,5
yes yes yes
EP 430-2
220-240
50
I
44
1300/1600
430
430
165/330
40
50/37
12
58
38
2,5
yes