Operation - Renkforce 1091696 Bedienungsanleitung

Operating instructions
Barcode-Scanner 2D USB
Item no. 1091696
Intended use
The barcode scanner is designed for quick and reliable scanning of common barcodes e.g.
UPC or EAN. The scanned codes can be inserted directly into documents or forms on a
connected computer. The barcode scanner is suitable for use in shops, warehouses or offices.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Barcode scanner
• USB cable
• Brief instructions
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
Operating elements
1
2
3
4
1 Reader unit 3 Handle
2 Trigger 4 USB cable with USB A plug

Operation

• Before beginning using the barcode scanner, please read the instructions on scanner
settings under "Settings".
• Connect the USB cable (4) to a USB port on your computer.
To disconnect the USB cable from the barcode scanner, insert a thin object, e.g. a
bent paper clip, into the small hole above the connector while simultaneously pulling
the USB cable from the socket.
• Open a document on your computer where you wish to insert the barcode. The barcode will
be inserted at the cursor's position.
• Hold the barcode scanner's reader unit (1) at a sufficient distance and at a slight angle to the
barcode. Depending on the size and type of barcode, you may need to adjust the distance.
Please observe the following illustrations when scanning barcodes.
• Pull the trigger (2) to scan the barcode. A beep sounds if scanning was successful.
Tips & notes
• Make sure that the barcode you wish to scan is clean.
• The barcode you wish to scan must be fully visible.
• Observe the correct angle and distance.
• Hold the reader unit horizontal to the barcode.
• Check the settings each time you turn on the device to prevent incorrect readings.
Settings
• You can configure the barcode scanner to your field of application. The required barcodes are
available in the included additional booklet.
• Proceed as follows to make settings (except keyboard language):
- First scan the barcode "Code Programming ON (Pro CMD: 0006010)" to enter settings
mode.
- Now scan the appropriate barcodes.
- Then scan the barcode "Code Programming OFF (Pro CMD: 0006000)" to confirm your
settings and exit settings mode.
• Proceed as follows to set the keyboard language ("Keyboard Country"):
- First scan the barcode "Code Programming ON (Pro CMD: 0006010)" to enter settings
mode.
- Now scan the barcode "Select Country Code (Pro CMD: 1103000)".
- Each country is assigned a number. Please review the table provided in the booklet. Scan
the appropriate barcode, e.g. "8 (Pro CMD: 0000080)" for Germany/Austria.
- Then scan the barcode "Save (Pro CMD: 0000160)" to confirm your setting.
- Then scan the barcode "Code Programming OFF (Pro CMD: 0006000)".