Safety Notes; Functional Description - Bosch GMS 120 Professional Originalbetriebsanleitung

OBJ_BUCH-1222-002.book Page 13 Wednesday, August 18, 2010 8:41 AM

Safety Notes

en
Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
Do not operate the measuring tool in explo-
sive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which
may ignite the dust or fumes.
For technological reasons, the measuring
tool cannot ensure 100 % certainty. To rule
out hazards, safeguard yourself each time
before drilling, sawing or routing in walls,
ceilings or floors by means of other infor-
mation sources, such as building plans, pic-
tures from the construction phase, etc. En-
vironmental influences, such as humidity or
closeness to electrical devices, can influence
the accuracy of the measuring tool. Surface
quality and condition of the walls (e.g., mois-
ture, metallic building materials, conductive
wallpaper, insulation materials, tiles) as well
as the amount, type, size and position of the
objects can lead to faulty measuring results.

Functional Description

Please unfold the fold-out page with the repre-
sentation of the measuring tool and leave it un-
folded while reading the operating instructions.
Intended Use
The measuring tool is intended for the detection
of metals (ferrous and non-ferrous metals, e.g.,
rebar), joists and "live" wires/conductors in
walls, ceilings and floors.
Bosch Power Tools
Product Features
The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1 Illuminated ring
2 Marking hole
3 Display
4 Operating-mode indication
5 On/Off button
6 Display-illumination button
7 Audio signal button
8 Button for detecting "live" conductors/
Operating mode "Power cable"
9 Button for metal detection/
Operating mode "Metal"
10 Button for detecting wood and metal
beams/Operating mode "Drywall"
11 Contact pads
12 Sensor area
13 Type plate
14 Battery lid
15 Latch of battery lid
16 Fixture for carrying strap
17 Protective pouch
18 Carrying strap
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Display Elements (see figure A)
a Switched-off audio signal indicator
b Warning-function indicator
c Indication of the object type "Non-metal ob-
ject"
d Indication of the object type "Non-magnetic
metal"
e Indication of the object type "Magnetic metal"
f Indication of the object type "Live conductor"
g Temperature control indicator
h Battery indicator
i Measuring indicator
j Fine scale
k Indication "CENTER"
2 609 140 723 | (18.8.10)
English | 13