Technical Details - MADRIX Plexus Kurzanleitung

End-Of-Life
This electrical device and its accessories need to be disposed of
properly. Do not throw the device into normal trash or household
waste. Please recycle packing material whenever possible.
Usage
In general, this device is designed to be operated as a hardware control
interface to be connected towards various types of controllable lights /
lighting controllers via DMX512 (USB-to-DMX) or Art-Net (DMX-over-
Ethernet). Do not use the interface for any other, deviant purpose.
The device can be connected to and disconnected from the PC during use and
without a reboot (Hot Swapping & Plug and Play). Multiple interfaces can be
used at the same time. Please mind the correct supply of power in this case.

Technical Details

USB power supply: External, AC 100V-240V ~ 60/50Hz input,
Power consumption: 2.5 Watts max. (500mA max.)
USB port:
DMX512:
DMX512 plug:
Ethernet/Art-Net:
Extension port:
SD card slot:
Case:
Dimensions:
Weight:
WHEN CONNECTING TO USB, ALWAYS USE AN ACTIVE USB 2.0
PORT OR A USB 2.0 HUB WITH ITS OWN POWER SUPPLY.
THE DEVICE REQUIRES 5V DC TO WORK. DO NOT USE ANY
OTHER VOLTAGE BECAUSE IT CAN DAMAGE THE DEVICE.
4
5.2V DC and 1000mA max. output over USB
USB 2.0, type B plug, Power over USB
2x 512 DMX channels, input or output
5-pin, XLR, female, NEUTRIK
RJ45, Ethernet plug, NEUTRIK
15-pin, D-Sub, US, female
SD and SDHC cards supported
Metal enclosure, IP20
154mm x 111mm x 45mm (length by width by height)
500g