Stand-Alone Mode - MADRIX Plexus Kurzanleitung

Stand-Alone Mode

Stand-Alone Mode is an important feature of the MADRIX
1x DMX-OUT, 2x DMX-OUT, or Art-Net is available in Stand-Alone Mode. The
PLEXUS uses a SD card to run automatic light shows without the need for a
computer. However, a MADRIX PC is required to preprogram the shows.
Several steps are required to create a Stand-Alone Show for your device.
1) Please configure your virtual matrix according to your LED installation. In
MADRIX ® , navigate to the menu 'Preferences'
'Preferences' 'Patch' for this task.
2) Create the effects you wish to use with the help of the graphical user
interface (GUI) of the software MADRIX
3) Navigate to the menu 'Window'
create a playlist. A live record is also possible without a Cue List.
4) Recording your effects and thus creating a MADRIX Record File (*.mrec) is
possible with the 'Recording' dialog (tab 'Recording' and tab 'Edit Record'). In
MADRIX ® , open the menu 'Window'
5) Converting Record Files (*.mrec) into DMX Data Files (*.dxd) is also done
with the help of the 'Recording' dialog (tab 'PLEXUS Conversion') in MADRIX
6) In order to create a PLEXUS Configuration, the Stand-Alone Show for your
device, please use the 'PLEXUS Configuration' dialog. In MADRIX
menu 'Tools' 'PLEXUS Configuration...'.
7) Export your show to the SD card or transfer the PLEXUS Configuration
directly to the SD card in your device over USB or Ethernet. In MADRIX
open the menu 'Tools'
8) Manually activate playback on the device, in case you did not configure
'AutoPlay' in your PLEXUS Configuration.
More information on each step is provided in the user manuals.
® .
'Cue List' in MADRIX
'Recording...'.
'PLEXUS Configuration...'.
®
'Matrix Generator' or
® if you wish to
®
, open the
PLEXUS.
® .
® ,
15