MADRIX Plexus Kurzanleitung Seite 8

SD Cards
The integrated SD card slot is located at the top of the device. In order to
access it, please open the metal lid first (see 'How To Open The Metal Lid' on
page 5). It supports SD or SDHC cards. SDHC cards are recommended.
Please note: The package of the PLEXUS includes one SD card with 2 GB
capacity. The SD card is already inserted into the SD card slot when shipped.
Inserting The SD Card
Hold the SD card as shown on the device! The canted edge must point to the
status LED and the pins must face towards the display. Now, carefully push
the SD card into the SD card slot until it clicks and snaps into its position.
Removing The SD Card
Slowly and carefully press the already inserted SD card into the device a little
further. Then, release the pressure. The implemented mechanism will
automatically release the SD card, which will then stick out from the slot.
Use two fingers to pull the card out of the slot.
Kensington Security Slot
In order to prevent unauthorized removal, you may use Kensington lock
security equipment. Attach the cable around an immovable object, insert the
compatible connector into the Kensington Security Slot of the PLEXUS and
secure the lock according to the instructions provided with the lock, for
example by turning the key or the combination lock.
LCD Graphics Display
How To Navigate Through Menus
Click 'OK' to open the menu bar. Then, navigate with the help of the arrow
buttons. When you have selected your target menu, press 'OK' to enter it.
How To Edit Values
Press 'OK' for two seconds. You can now change the value(s). Use the arrow
keys for editing and navigation. Press 'OK' to apply the changes.
7