MADRIX Plexus Kurzanleitung Seite 14

Manually Installing The PLEXUS Driver
When Windows indicates that the hardware driver has not been installed
correctly, please manually update the driver.
In Windows Vista or Windows 7, click 'Start'
and Security' (or just 'System')
PLEXUS' in the section 'Other devices' and choose 'Update Driver
Software...'. Then, navigate to the driver location on your harddisk:
'C:\Program Files (x86)\MADRIX\madrixusbdriver\plexus\windows'
In Windows XP, click 'Start'
tab 'Hardware'
section 'Other devices' and choose 'Update Driver Software...'. Then,
navigate to the driver location on your harddisk:
'C:\Program Files\MADRIX\madrixusbdriver\plexus\windows'
Enabling Network Drivers in MADRIX
®
In MADRIX , please open the menu 'Preferences'
tab 'Devices (Network)'. Now, activate the option 'Enable PLEXUS Networking'
in the section 'inoage – MADRIX'. Press 'OK'.
Please note: Enabled network drivers (PLEXUS Networking) are required for
the Ethernet connection from your PC to the device.
Enabling USB Drivers in MADRIX
®
In MADRIX , please open the menu 'Preferences'
tab 'Devices (USB/PCI)'. Now, activate the option 'MADRIX PLEXUS
interfaces'. Press 'OK'.
Please note: Enabled USB drivers are required for Live Mode via USB and the
USB connection from your PC to the device.
'Device Manager'. Right-click on 'MADRIX
'Settings'
'Device Manager'. Right-click on 'MADRIX PLEXUS' in the
'Control Panel'
'Control Panel'
®
'Options...'. Select the
®
'Options...'. Select the
'System
'Systems'
13