MADRIX Plexus Kurzanleitung Seite 17

Extension Port — Remote Control
devices for remote control. In MADRIX
'PLEXUS Configuration...'
individually for the corresponding PLEXUS Configuration.
Pin Assignment
1
2 Port 1
3 Port 3
4 Port 5
5 Port 7
6 Port 9
7
8
9
10 Port 2
11 Port 4
12 Port 6
13 Port 8
14 Port 10
15
Web Server — Remote Control
The PLEXUS provides an integrated web server. Connect your PLEXUS and the
remote device accessing the PLEXUS to a network. Open a web browser and
type in the IP address of your PLEXUS. The IP address can be found and
changed in the PLEXUS menu 'Settings'
will show an interactive illustration of your device for remote control.
Please note: Make sure to use one and the same network and check if the
settings of the operating system and the settings of the PLEXUS are correct.
16
Ground
Power
Ground
Power
Ground
The MADRIX
15-pin
individually addressable ports. The
extension port makes it possible to
connect external analog or digital
®
, please open the menu 'Preferences'
'Extension Ports' to configure each port
Available Settings
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
5V, 100mA max.
5V, 100mA max.
Digital Input, Digital Output
Digital Input, Digital Output
Digital Input, Digital Output
Digital Input, Digital Output
Digital Input, Digital Output
'Network'. Once loaded, the page
®
PLEXUS features a
serial connector with