Technical Specifications - MADRIX Orion Bedienungsanleitung

End-Of-Life
This electrical device and its accessories need to be disposed of
properly. Do not throw the device into normal trash or household
waste. Please recycle packaging material whenever possible.
Usage
In general, this device is designed as a general-purpose input device for analog
input and Ethernet-based output for remote control and interactivity. Do not
use the interface for any other, deviating purpose. Directly connect to a wide
range of compatible sensors, potentiometers, switches, and triggers. Easily
create interactive projects using sensors for light, temperature, PIR, and many
more. The device can be connected to and disconnected from USB or Ethernet
network during use and without a reboot (Hot Swapping & Plug and Play).
Multiple interfaces can be used at the same time.

Technical Specifications

Supply of power:
(See pages 6 – 9)
Power supply:
(As provided / external)
Power consumption:
Input signals:
Ports:
Input pins:
Ethernet:
USB port:
Case:
Dimensions:
Weight:
Temperature range:
Relative humidity:
DC 5 V – 24 V, over A) 2-pin pluggable screw terminal
with 500 mA max. load per port when supplying through
to the ports (external power supply included),
B) 5 V USB, C) Port 1 or Port 2
AC Input: 110 – 240 V, 50/60 Hz, 0.6 A;
DC Output: (3 V) / (4.5) / 5 V / 6 V / 7.5 V / 9 V / 12 V,
2.0 A max.
< 1.5 W during normal operation (300 mA max.)
0 V – 12 V, analog
2x ports (via 2x 6-pin pluggable screw terminals)
2x 4 separate pins (8x in total)
2x RJ45, Auto MDI-X, 10/100 MBit/s (compatible with
1 GBit/s)
USB 2.0, type B plug
Non-conductive, IP20, UL94 V-0 flammability rating,
designed for 35 mm DIN-rails or wall mounting
92 mm x 70 mm x 45 mm (length x width x height)
105 g | 120 g incl. screw terminals and wall mounts
-10 °C to 70 °C (Operating) | -20 °C to 85 °C (Storage)
5 % to 80 %, non-condensing (Operating / Storage)
4
EN