Audio Settings - Kenwood DAB400U Bedienungsanleitung

CD / USB / iPod / ANDROID
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected or
activated.
4 Press and hold to exit.
To return to the previous setting item, press
USB
MUSIC DRIVE DRIVE CHANGE: The next drive ([DRIVE 1]
to [DRIVE 5]) is selected automatically and
playback starts.
1
Repeat steps to
drives.
SKIP SEARCH 0.5%/ 1%/ 5%/ 10%: While listening to iPod
or ANDROID, selects the skip search ratio over
the total files.
12

AUDIO SETTINGS

While listening to any source...
1
2
3
4
5
To return to the previous setting item, press
.
SUB-W LEVEL
Default: XX
BASS LEVEL
MID LEVEL
TRE LEVEL
EQ PRO (This setting is stored to [USER].)
3
to select the following
BASS ADJUST BASS CTR FRQ
MID ADJUST
TRE ADJUST
Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
Turn the volume knob to select an item (see the following table), then press the knob.
3
Repeat step until the desired item is selected or activated.
Press and hold to exit.
–15 to +15 (0) Adjusts the subwoofer output level.
–8 to +8 (+2)
Adjusts the level to memorize for each source. (Before making an adjustment,
–8 to +8 (+1)
select the source you want to adjust.)
–8 to +8 (+1)
60/ 80/ 100/ 200: Selects the center frequency.
BASS LEVEL –8 to +8 (+2): Adjusts the level.
BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
MID CTR FRQ 0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects the center frequency.
MID LEVEL –8 to +8 (+1): Adjusts the level.
MID Q FACTOR 0.75/ 1.00/ 1.25: Adjusts the quality factor.
TRE CTR FRQ 10.0KHZ/ 12.5KHZ/ 15.0KHZ/ 17.5KHZ: Selects the center frequency.
TRE LEVEL –8 to +8 (+1): Adjusts the level.
.
Default: XX