Optical Signal; Control Panel - Electrolux GA55GLV402 Benutzerinformation

Optical signal

After the start of the washing programme, on
the floor below the appliance door, the opti-
cal signal shows:
• Red light on: start of the washing pro-
gramme. The light stays on for all the du-
ration time of the washing programme.
• Red light goes off: end of the washing pro-
gramme.

Control panel

1 On/off button
2 Digital display
3
Programme button
4
Half-load button
5
Sanitize button
6
Extra-rinse button
7
Multitab button
8
Delay start button
9 Indicator lights
10 Function buttons
1)
Rinse aid
1)
Salt
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while
a washing programme operates.
• Red light flashes: malfunction of the appli-
ance.
If the appliance is installed higher with a
flush kitchen furniture door, the optical
signal will not be visible.
10
Indicator lights
The indicator light comes on when it is necessary
to fill the rinse aid. Refer to the chapter 'Use of
rinse aid'.
The indicator light comes on when it is necessary
to fill the salt container. Refer to the chapter 'Use
of dishwasher salt'.
After you fill the container, the salt indicator light
can continue to stay on for some hours. This does
not have an unwanted effect on the operation of
the appliance.
electrolux 77
7 8 9