Setting The Password - Axis 232D+ Installationshandbuch

AXIS 231D+/232D+ Installation Guide

Setting the Password

When accessing the AXIS 231D+/232D+ for the first time, the
'Configure Root Password' dialog will be displayed.
1. Enter a password and then re-enter it, to confirm the
spelling. Click OK.
2. Enter the user name "root" in the dialog as requested.
Note: The default administrator user name root cannot
be deleted.
3. Enter the password as set above, and click OK. If the
password is lost, the AXIS 231D+/232D+ must be reset
to the factory default settings. See page 12.
4. If required, click Yes to install AMC (AXIS Media Control), which allows viewing of the video stream in
Internet Explorer. You will need administrator rights on the computer to do this.
Setup - Provides all the tools
for configuring the camera to
requirements
Page 11
Help - Displays
online help on all
aspects of using
the camera.