Assign An Ip Address - Axis 232D+ Installationshandbuch

AXIS 231D+/232D+ Installation Guide

Assign an IP address

Most networks today have a DHCP server that automatically assigns IP addresses to connected devices. If your
network does not have a DHCP server, the AXIS 231D+/232D+ will use 192.168.0.90 as the default IP address.
If you would like to assign a static IP address the recommended method in Windows is either AXIS IP Utility or
AXIS Camera Management. Depending on the number of cameras you wish to install, use the method that best
suits your purpose.
Both of these free applications are available on the Axis Network Video Product CD supplied with this product, or
they can be downloaded from www.axis.com/techsup
Method
AXIS IP Utility
See page 8
AXIS Camera Management
See page 9
Notes:
• If assigning the IP address fails, check that there is no firewall blocking the operation.
• For other methods of assigning or discovering the IP address of the AXIS 231D+/232D+, e.g. in other
operating systems, see page 10.
Recommended for
Single camera
Small installations
Multiple cameras
Large installations
Installation on a different subnet
Page 7
Operating system
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server