Setting The Password - Axis 221 Installationsanleitung

AXIS 221 Installation Guide

Setting the Password

1. When accessing the AXIS 221 for the first time,
the 'Configure Root Password' dialog will be dis-
played on the screen.
2. Enter a password and then re-enter it, to confirm
the spelling. Click OK.
3. The 'Enter Network Password' dialog will
appear. Enter the User name: root
Note: The default administrator user name root is permanent and cannot be deleted.
4. Enter the password as set in step 2 above, and click OK. If the password is lost, the AXIS
221 must be reset to the factory default settings. See page 10.
5. If required, click Yes to install AMC (AXIS Media Control), to allow viewing of the video
stream in your browser. You will need administrator rights on the computer to do this.
6. The Live View page of the AXIS 221 is displayed, complete with links to the Setup tools,
which allow you to customize the camera to your specific needs.
Downloaded from www.Manualslib.com manuals search engine
Page 9
Help - Displays online help
on all aspects of using the
camera.
Setup - Provides all the
necessary tools for setting
up the camera to
requirements.