Herunterladen Inhalt Inhalt Diese Seite drucken

Conrad Timer Switch Bedienungsanleitung Seite 22

Timer switch
Inhaltsverzeichnis

Werbung

Remarque !
Lors du réglage/de la modification des heures/pro-
grammes, il est possible d'augmenter la vitesse de
réglage. Quand la touche correspondante est tenue
appuyée suffisamment longtemps, les valeurs défi-
lent plus vite = réglage rapide.
b) Appuyez la touche "UHR" et maintenez-la appuyée,
puis appuyez simultanément sur la touche "TAG" pour
le réglage du jour jusqu'à ce que le jour actuel de la
semaine apparaisse (ligne supérieure de l'affichage).
c) Maintenez appuyée la touche "UHR" et appuyez
simultanément sur la touche "STD" (pour heure) jus-
qu'à ce que l'heure actuelle apparaisse (devant les
deux-points).
d) Maintenez appuyée la touche "UHR" et appuyez
simultanément la touche MIN (pour minutes) jusqu'à ce
que l'heure actuelle apparaisse en minutes (derrière
les deux-points).
e) Dès que vous lâchez la touche "UHR", l'heure
actuelle est « démarrée » (par exemple affichage de :
MO 11:20 OFF pour : lundi 11 heures 20 mode OFF).
58
d) Release the "MIN" key. After approx. 4 s the "Zz"
symbols starts flashing. The specified time starts to
count down. Press the "UHR" key once to return to the
display of the current time. Press the "UHR" key again
to view the time counting down. If, however, you press
the "MODUS" key, the programmed time is deleted and
the countdown is stopped. To reactivate the count-
down, you must reenter the running time.
A3.2 Switching off the entered programs
(switch times) = "OFF"
If none of the entered is to be activated, you have the
option of deactivating the timer clock. For this purpose,
press the "MODUS" key (red) until "OFF"
appears on the bottom line of the display. The set pro-
grams are thus ignored i.e., no appliance will be
switched on. The specified program times remain
unchanged.
A3.3 Automatic function "AUTO"
The "AUTO" function switches a connected appliance
on or off at the programmed times. Simply press the
"MODUS" key until "AUTO" appears on the bottom line
of the display. If a program is being executed and pow-
er is applied to the timer clock (=normal status), a
43

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis