Herunterladen Inhalt Inhalt Diese Seite drucken

Conrad Timer Switch Bedienungsanleitung Seite 19

Timer switch
Inhaltsverzeichnis

Werbung

A3.1 la fonction de compte à rebours "Zz"
A3.2 la désactivation "OFF" des programmes entrés
A3.3 la fonction automatique "AUTO" (=mise en servi-
ce du minuteur=mise en service du minuteur aux
horaires programmés)
A3.4 la mise en service manuelle "ON"
et
A3.5 la fonction aléatoire "RND" (=Random = aléatoire)
A3.1 COUNT – DOWN (=compte à rebours, similaire à
un "Sleep – Timer")
Il y a deux possibilités de se servir de la fonction «
compte à rebours » :
Quand le symbole de lampe est visible, l'appareil bran-
ché sera arrêté après écoulement d'1 minute jusqu'à 2
heures et 59 minutes. (pend ant l'écoulement de l'ho-
raire de « marche »).
Cependant, quand le symbole de lampe barrée est
visible et après écoulement des blocs de temps corres-
pondants (en fonction du réglage) l'appareil branché
sera mis en marche (pendant l'horaire d' "arrêt").
Pour ajuster les heures auxquelles un appareil branché
(par ex. radio, lampe, téléviseur, magnétophone etc.)
doit être mis en marche ou mis hors service, procédez
comme suit :
64
A2 Programming the switching times of the 20
week timers
You can only set the switching times in OFF mode,
AUTO mode, or ON mode. Hold the "PRG" key pressed
down until the desired timer (PRG 1 to PRG 20) appears
on the left border of the display. The left border shows
the lamp symbol (for switch-on time) or the crossed
lamp symbol (switch-off time). Set/modify the timer as
follows:
a) Press the "PRG" key until the desired timer PRG 1 to
PRG 20 appears on the display.
Attention!
If you hold the "TAG", "STD", or the "MIN" key
pressed down for more than approx. 1 s, the scan-
ning speed increases. If no key is applied for a
period of approx. 15 s, you leave the setting mode
automatically for the current time display.
b) Press the "TAG" button repeatedly until you have
reached the day on which the program is to start or
end. The entered program may also start/end on sever-
al days (= group of days = group function) at the same
time. The possible group functions are listed below:
37

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis