Saeco Syntia Bedienungsanleitung Seite 41

• When the solution in the tank is
fi nished dispensing, the icon on the
side is displayed to indicate that the
selector dial must be brought back to
Red
the " " position.
• The icon indicates that the tank must
be rinsed and fi lled.
Rinse the water tank thoroughly and
refi ll it with fresh drinking water.
Red
• Empty the container used to collect the
liquid dispensed by the machine and
place it under the steam wand.
• When inserting the tank filled with
water in the machine, the icon on the
side is displayed; turn the selector dial
clockwise to position "
Red
• The machine starts the rinse cycle.
Red
• When the water in the tank is fi nished
dispensing, the icon on the side is
displayed to indicate that the selector
dial must be brought back to the " "
Red
position.
• The icon indicates that the tank must
be rinsed and fi lled.
Rinse the water tank thoroughly and
refi ll it with fresh drinking water.
Red
• Empty the container used to collect the
liquid dispensed by the machine and
place it under the steam wand.
Red
Red
".
• When inserting the water tank in the
machine, turn the selector switch
clockwise to position " ". Dispense
the entire tank as previously described.
At the end, fi ll the tank again.
• When inserting the water tank again,
the icon on the side is displayed. Press
the " " button to exit the descaling
cycle.
• The machine now carries out the
warm-up and rinse cycle to prepare for
product brewing.
• Empty the container used to collect the
liquid dispensed by the machine.
The descaling solution must
be disposed of according
to the manufacturer's instructions
and/or regulations in force in the
country of use.
After completing the descal-
ing cycle, wash the brew
group as described in the "Brew
group" section in the "Cleaning and
maintenance" section.
Reassemble the external part of the Pan-
narello.
• 41 •