Descaling - Bosch TES 71321 Gebrauchsanleitung

46 46

Descaling

Duration: approx. 30 minutes.
Cleaning and service
Descale
Clean
The start button 8 lashes while the different
descaling processes are running.
The igures on the top right indicate the
progress of the programme.
Important: If there is a ilter in the water
tank 11, it needs to be removed before the
service programme is run.
à
● Press the button 3.

Descale start
● Press the start button 8; the display 5 will
guide you through the programme.
Empty drip tray
Replace drip tray
● Empty drip tray 26 and replace.
Place 0.5 l container under milk

frother start
● Place a container with a capacity of 0.5
litres under the milk frother 10.
● Press the start button 8.
Note: If the water ilter is activated, the
display will prompt you to remove the ilter,
then press the start button 8 again.
Remove filter
Add 0.5 l water and descaler

start
● Pour lukewarm water into the empty wa-
ter tank 11 up to the "0.5" litre mark and
dissolve 2 Bosch descaling tablets in it.
Robert Bosch Hausgeräte GmbH
TES713_H1.indb 46
 start

start
● Press the start button 8. The descaling
pro gramme will now run for about
20 minutes.
Descaling
Not enough descaling fluid.

Refill fluid start
Note: If there is not enough descaling solu-
tion in the water tank 11, the corresponding
prompt is displayed. Pour in descaling solu-
tion and press start 8 again.
Clean and refill water tank

start
● Rinse the water tank 11 and reill it with
fresh water up to the "max" mark.
● Press the start button 8. The descaling
pro gramme now runs for about 1 minute
and rinses the appliance.
Descaling
Empty drip tray
Replace drip tray
● Empty drip tray 26 and replace.
Replace the ilter if one is being used.
The appliance has completed descaling and
is ready for use again.
Important: Wipe down the appliance using
a soft, damp cloth to immediately remove
any descaler residue. Such residue can
cause corrosion.
en
25.04.2012 18:56:46