Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
Menu settings
j
● Hold the
button 7 down for at least
3 seconds.
The different setting options are now
displayed.
Settings
Language
Coffee temp.
Hot Water temp.
In the following operating instructions, each
new setting begins with
followed by an exact description.
The different setting options can be selected
<
>
with the
and
Settings
Water hardness
Water filter
Transport. lock
N.B.: The changes you have made are
saved automatically. It is not necessary to
coni rm them additionally.
j
>
Coffee temp.
3 sec. +
● Turn the rotary knob 6 to set the coffee
temperature. The setting applies to all
types of preparation except the custom-
ised settings under "Customising".
j
>
3 sec. +
Hot Water temp.
● Turn the rotary knob 6 to set the tempera-
ture. The setting applies to all types of
preparation except the customised set-
tings under "Customising".
TES713_H1.indb 39
English
j
>
3 sec. +
buttons 4.
start
j
>
Language
3 sec. +
● Turn the knob 6 to select the required
language.
j
>
Profile exit
3 sec. +
● Here you can set whether the appliance
should exit the customising function auto-
auto
matically
or manually
j
>
Auto off after
3 sec. +
● Turn the knob 6 to enter the time
span after which the appliance should
automatically switch off following drink
preparation.
A time between 5 minutes and 8 hours can
be set.
j
>
Cup warm. off in
3 sec. +
Here you can set the time span after which
the cup warmer 19 switches off again
automatically.
● Set the required time by turning the knob 6.
j
>
Contrast
3 sec. +
The display 5 contrast can be set from
+10
to
. The factory setting is
● Enter the required setting with the knob 6.
j
>
Water hardness
3 sec. +
● Turn the knob 6 to select the required
1, 2, 3
water hardness
Note: It is important to set the water hardness
correctly, so that the appliance indicates
accurately when the descaling programme
should be run. The factory setting for the
4
water hardness is
.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
39
39
manually
.
–10
+0
.
4
or
.
TES713 | 04/2012
25.04.2012 18:56:44
Werbung
Kapitel
Inhaltsverzeichnis
