Customising The Recommended Temperture - Atag ZX4570G Bedienungsanleitung

USING YOUR APPLIANCE
1 2
4
3
5
6

Customising the recommended temperture

EN 10
At the end of the (programmed) cooking time:
• the oven stops,
• display flashes,
• a series of beeps are emitted for a few minutes. The beeps can be
stopped by pressing any button.
Cooking with delayed start and selected end of cooking time
Proceed as for programmed cooking.
• Press the time button.
The end of cooking time symbol flashes to indicate that it may now
be set.
• Turn the knob to set the end of cooking time.
Example: end of cooking time 13h30 p.m.
• Press the knob to confirm.
The end of cooking time will registers automatically after a few seconds.
The end of cooking time display stops flashing. The display returns
to the time of day. An animated display indicates that the oven is in
delayed cooking mode. The light inside the oven comes on when
cooking starts and goes out at the end of cooking.
Once these 3 steps have been completed, the oven heating start time
is delayed so that cooking ends at 13h30.
At the end of the (programmed) cooking time:
• The oven stops and the cooking time symbol and 0h00 flash.
• A series of beeps are emitted for a few minutes. The beeps can be
stopped by pressing any button.
If you wish to customise the recommended temperature:
• Select the cooking function:
• Press the temperature button until the temperature display begins
flashing.
• Set the temperature, using the knob.
• Press the knob to confirm.