Advice On Disposal - Bosch sensixx B20L Gebrauchsanleitung

Problem
Dirt comes out • There is a buildsup of scale or
through the sole plate.
• Chemical products or additives have
The iron does not • The boiler is not switched on or the
produce any steam.
• The steam regulator is set to the
The ironed gar ment • The selected temperature is too high
turns dark and/or
sticks to the soleplate.
The soleplate turns • This is a regular consequence of
brown.
The appliance makes • Water is being pumped into the
a pumping sound.
• The sound will not stop.
Loss of pressure Steam release button activated during
during ironing. a long period of time.
Waterspots appear May be caused by steam condensed
on the garment during on the ironing board.
ironing.
Water spots appear Water spots are caused by steam
on the garment during condensation in the hose when cooling
use of the "Ultimate down after use.
steam" function
The hose gets hot This is normal. It is caused by the
during use. steam passing throug the hose during
steam ironing.
Water leakage from Drainage plug located at the bottom of
the boiler the appliance is loose.
The iron does not stop "Pulse steam" function activated by
steaming after placing it double click.
on the pad.
If the above does not solve the problem, get in touch with authorized technical service.

Advice on disposal

Our goods come in optimised packaging. This basically
consists in using nonscontaminating materials which
should be handed over to the local waste disposal
service as secondary raw materials. Your local town
council can give you information about how to dispose
of obsolete appliances.
You can download this manual from the local homepages of Bosch.
Possible causes
minerals in the steam tank.
been used.
water tank is empty.
minimum position.
and has damaged the garment.
usage.
steam tank.
Solution
• Use tap water mixed 50% with dis tilled
or demineralised water. If the tap water in
your district is very hard, mix tap water with
distilled water 1:2.
• Clean the sole plate with a damp cloth.
• Never add products to the boiler water.
• Set the main power button (12) to the "I"
position and/or fill the water tank.
• Increase the steam flow by turning the
steam control (10).
• Select a suitable temperature for the
material being and clean the sole plate
with a damp cloth.
• Clean the soleplate regularly with a damp
cloth.
• This is normal.
• If the sound will not stop, do not use
the steam generator and contact an
authorised technical service centre.
Use the steam release button with intervals.
This improves the ironing result as the
textiles will be dried and stay smooth better.
Wipe the textile cover of the ironing board,
and iron the spots without steam to dry
them.
Water drops stop coming out of the
soleplate after using the "Ultimate steam"
function for some time.
Place the hose on the opposite side so that
you can not touch the hose during ironing
Tighten up boiler drainage plug with a coin
Just press the trigger once again and the iron
will stop steaming at once.
This appliance
accordance with European Directive
2002//EG concerning used electrical
and electronic
electrical and electronic equipment d
WEEE).
The guideline determines the framework for
the return and recycling of used appliances as
applicable throughout the EU.
en
is labelled in
appliances (waste
1