Audio Sources; Connecting Two Or More Pa Systems In Series; Connector Configuration - Omnitronic WAMS-08BT Bedienungsanleitung

Audio Sources

As signal source, microphones, music instruments and audio units with line level can be connected.
1
Combo input CH 1 connects a dynamic microphone via XLR or 6.3 mm plugs.
2
Input CH 2 connects instruments with mono line level output via 6.3 mm plugs.
3
Connect units with stereo line output (e.g. keyboard, CD player or laptop) to the RCA inputs LINE IN or
the 3.5 mm jack input AUX IN of channel 3/4.

Connecting Two or More PA Systems in Series

For larger indoor PA applications where the sound has to be radiated as even as possible, two or more PA
systems may be connected in series. For this connect your signal sources to the primary unit and connect
the mono line output LINK OUT to one of the adjustable line inputs of the first secondary unit. Connect
further units likewise. The output LINK OUT provides the mixed signal of the signal sources adjusted with the
individual level controls and the tone controls. Alternatively, you can connect other units with line level inputs
(e.g. mixer, recording unit) to the output.

Connector Configuration

32