Inverter; Other System Requirements; Intended Use; Scope Of Supply - Fronius String Control 250/25 DCD DF Bedienungsanleitung

The Fronius String Control 250/25 DCD DF is designed exclusively for

Inverter

use with the following inverters:
-
-
Other System -
Requirements -
The device is intended solely for use as a collector and measuring device

Intended Use

for the solar module DC strings.The device may be operated only with the
following inverters: FRONIUS CL 36.0 / 48.0 / 60.0 and FRONIUS IG 300
/ 390 / 400 / 500.
Any other purpose does not constitute intended use. The manufacturer
shall not be liable for any damage resulting from such improper use.
Intended use also includes following all information from the operating
instructions.
Scope of
-
Supply
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

Optional

If type 1 or type 2 overvoltage protection is desired, it can be installed in
the Fronius String Control 250/25 DCD DF to the DIN rail provided for this
purpose. The size of the over-voltage arrester may not exceed 8 TE.
FRONIUS CL 36.0 / 48.0 / 60.0
FRONIUS IG 300 / 390 / 400 / 500
Fronius Datalogger
PC with Fronius Solar.access software installed
1 Fronius String Control 250/25 DCD DF
2 M40 metric screw joints including counter nuts
50 M16 metric screw joints including counter nuts
20 M16 threaded plugs
1 M20 metric screw joint including counter nut
1 M20 metric threaded plug
1 M25 metric screw joint including counter nut
2 M32 metric screw joint
2 M40 / M32 reducers
1 protection against contact
and 2 M4 screws)
1 rubber insert
1 plastic bolt (pre-installed)
1 Fire prevention leaflet
1 silicone tube 740 mm
1 silicone tube 510 mm
1 operating instructions
(attached using 2 M4 x 50 mm spacers
4