Operating Hints; Basic Setup - Grundig STR 8150 Serviceanleitung

STR 8150

Operating Hints

This chapter contains excerpts from the operating instructions. For further particulars please refer to the appropriate user instructions the part number
of which is indicated in the relevant spare parts list.
STATUS
11 . 332 GHZ H
7 . 02 7 . 20 MHZ
TUE 19 : 56
MAIN MENU
1 TIMER
2 INSTALL
3 CHANNEL SETUP
4 LOCK CONTROL
PRESS 1- 4 OR
LANGUAGE
1 ENGLISH
2 DEUTSCH
3 FRANCAIS
PRESS 1- 3 OR
TIMER
STATUS
MODE
CHAN.
WEEK
DAY
START
STOP
TIME
PRESS OK OR
22
GRUNDIG Service
THE MENUS
________________________________________________________________________________
The STATUS menu
1 Press the » « button once: the » STATUS « menu is briefly displayed on the
picture screen.
The STATUS menu informs you about
008 KABEL 1
– the currently selected TV or radio channel,
– the currently selected channel position and the channel name,
PANDA
– the transmission frequency and polarity of the channel,
– the audio frequencies of the channel and the significance for supreme
sound quality, e.g. PANDA,
– the current day and time.
The MAIN MENU
1
To display the » MAIN MENU« on the picture screen, press the » « button
twice.
Key to menu items:
1 TIMER
2 INSTALL
I
3 CHANNEL SETUP
4 LOCK CONTROL
PRESS 1- 4 OR
Note:
Only the flashing indication/setting can be changed in the sub-menus.

BASIC SETUP

Selecting the desired menu language
You can select the desired menu language. This is the language in which the
menu contents appears on the picture screen.
1 Display the »MAIN MENU« on the screen by pressing the »
2
Call up the »INSTALLATION« sub-menu using the »2« button.
3
Call up the »LANGUAGE« sub-menu using the »3« button.
4
Select the desired menu language (e.g. »ENGLISH«) using the »1« button.
– The satelllite receiver returns automatically to the »MAIN MENU«.
– The selected menu language is automatically saved.
5
Select the desired sub-menu using the
I
or
exit the main menu by pressing the »
Setting the time and day
You can set the current time and day in the »TIMER« sub-menu.
1
OFF
1 Display the »MAIN MENU« on the screen by pressing the »
NORMAL
001 ARD
1
2 Press »1« to display the »TIMER« sub-menu.
MON
00 : 00
00 : 00
3 Repeatedly press »,« or ».« until the hours setting flashes in the
17 : 49 MON
I
»TIME« row, then use the
– The minutes setting flashes.
4
Use the »1...0
– The day setting flashes.
Set time, enter timer data.
Basic LNC setup, decoder settings/AV,
menu language selection.
Set up channel positions, edit favourite
channel indices.
Lock menu, change or delete code.
Select the desired sub-menu 1- 4 or exit.
I
_____________________________________________________________________
»1...4 « buttons,
« button.
i
»1...0 « buttons to enter the current hour.
« buttons to enter the current minute.
Allgemeiner Teil / General Section
21
« button twice.
i
« button twice.
i
1 - 11