Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STR 8150
NAME
CH.
LNC
POL
GHZ
VIDEO
CONT.
PRESS OK OR
NAME
CH.
LNC
POL
GHZ
VIDEO
CONT.
PRESS OK OR
NAME
CH.
LNC
POL
GHZ
VIDEO
CONT.
PRESS OK OR
40
40
GRUNDIG Service
CHANNEL SETUP
Note:
When a channel position is locked (»LOCK ON«), the picture and sound are
automatically switched off if the wrong code number (PIN) is entered
(parental lock for broadcasts unsuited for children).
16
Select »LOCK « then use the
. . ZDF . . .
»OFF« option.
002
AUDIO
STEREO
1– A
7 . 02 7 . 20
Note:
H
PANDA BW1
Depending on the decoder used, one of four possible settings can be
10 . 964
RADIO OFF
16 : 9
OFF
selected for each individual channel position.
NORM.
LOCK OFF
For more information consult the decoder's user manual.
1
DEC .
OFF
I
17
Select » DEC. « then use the
»OFF« Decoder off.
»A–«
»–V«
»A–V« Decoder on, the audio and video signals are decoded, the picture
18
Select » NAME «.
ZWEITE . .
– The first character of the channel name flashes to the right of » NAME «.
002
AUDIO
STEREO
1– A
7 . 02 7 . 20
19
Use the ».« button to mark the position of the character you wish to enter
H
PANDA BW1
or change.
10 . 964
RADIO OFF
16 : 9
OFF
– Up to 8 positions are available for a name.
NORM.
LOCK OFF
1
DEC .
OFF
I
20
Use the
– The digits 0 to 9, the letters A, B to Y, Z, the signs
are available.
21
Press »OK« to save all settings.
– The » CHANNEL SETUP« sub-menu appears on the picture screen.
Press »
22
i
CHANNEL SETUP
Copying a channel position
1
Use the
you wish to copy.
2
Call up the » CHANNEL SETUP« sub-menu by pressing the »
followed by »3«.
3
Call up the » TUNING« sub-menu by pressing »1«.
– The channel position number, e.g.
channel index.
4
Use the
. . RTL . . .
(= channel position number in the " NORMAL " channel index) into which
012
AUDIO
STEREO
you wish to copy.
1– A
7 . 02 7 . 20
H
PANDA BW1
10 . 964
RADIO OFF
To copy further channel positions, repeat the steps
16 : 9
OFF
NORM.
LOCK OFF
1
DEC .
OFF
5
Press »OK« to save the setting.
I
– All data of the copied channel position is assigned the new channel
position after saving.
– The » CHANNEL SETUP« sub-menu appears on the picture screen.
6
Press »
i
_______________________________________________________________________
or :« button to select the » ON« or
»;
or :« button to select the required setting:
»;
Decoder on, only the audio signal is decoded.
Decoder on, only the video signal is decoded, the picture screen is
automatically switched to blue background.
screen is automatically switched to blue background.
:
»;
or
button to select the desired character.
+
« as often as required to exit the menu.
_______________________________________________________________________
,« buttons to select the channel position number
»1 ... 0
« or
».
»0 04
«, flashes in the " NORMAL "
:« buttons to select the new channel position
»1 ... 0
« or
»;
1
to 4.
« as often as required to exit the menu.
Allgemeiner Teil / General Section
–
and
, and the blank
39
39
« button twice
i
1 - 15
Werbung
Inhaltsverzeichnis
