Inhaltsverzeichnis
Werbung
Operating Hints
This chapter contains excerpts from the operating instructions. For further particulars please refer to the appropriate user instructions the part number of which is indicated in the
relevant spare parts list.
THE CONTROL UNIT
B 1
B 2
B 3
RS 232
The two-line display is activated by pressing any key.
Display
{
Display contrast control.
The key functions of the control unit
MODE
For selecting the next menu item or next menu.
From any menu item: reset and return to the access menu without
storing by pressing the key several seconds.
MULTI
When in the "OUTPUT" menu (analog): e.g. indication of the
output channels of all channel lines of the selected module.
When in the "AUDIO-IN" menu (analog): e.g. selection of the
sound carrier (MAIN, SubMONO, STEREO).
When in the "OUTPUT" menu (digital): e.g. indication of the output
channels of all channel lines of the selected module.
For selecting the "RANDOM" and "SPECTRUM" menus.
Move cursor to the left or to the right.
+
–
/
Change settings.
M
Store the changed settings in memory.
The sockets on the control unit
/
Voltage supply for the analog and digital modules.
B1
B2
Voltage supply for the terrestrial amplifier module HTM 300.
B3
RS 232
9-pin SUB-D socket (serial interface) provided for PC-controlled
programming; input socket for software updates.
_______________________________________________
{
MULTI
MODE
M
GENERAL
___________________________________________________________________________
Scope of delivery
1 base unit STC 1880 with fixing material
1 mains cable
1 ferrite core in plastic housing
1 user manual
Retrofit kits and modulators for the base unit
STC 1880
STC 1880 – base unit, not equipped,
order No. GAF 5859
Can be fitted with analog or digital SAT modules.
HAC 1880 – analog unit, without modulators,
order No. GAF 5900
Quadruple SAT analog converter,
must only be fitted with analog VHF and/or UHF modulators.
HAM 1833 – analog VHF modulator,
order No. GAF 6000
Output channels adjustable from S 3 to S 24 including C 5 to C 12
HAM 1835 – analog UHF modulator,
order No. GAF 6100
Output channels adjustable from C 21 to C 69
HDC 1880 – digital unit, without modulators,
order No. GAF 6200
Quadruple digital SAT converter,
must only be fitted with digital VHF and/or UHF modulators.
HDM 1814 – digital VHF modulator,
order No. GAF 6300
Output channels adjustable from S 21 to S 41
HDM 1815 – digital UHF modulator,
order No. GAF 6400
Output channels adjustable from C 21 to C 69
Universal decoder retrofit kit,
order No. GAG 1300
for connecting external equipment (e.g. decoder (descrambler), video recorder,
video camera). For coupling in and out video and audio signals.
HTM 300 – terrestrial amplifier module,
order No. GAG 1200 – (deliverable from 2001) –
for converting terrestrial TV programmes (selective) and
terrestrial FM radio programmes (broad-band).
HTM installation set for the terrestrial amplifier module,
order No. GAG 1400 – (deliverable from 2001) –
Werbung
Inhaltsverzeichnis
