11 Operation
11.1 Weighing
Start balance by pressing
0.0
0
The
Put baby/toddler in the centre of the weighing pan/weighing
Wait for the rest position display
If the baby/toddler is heavier than the maximum weighing
11.2 Taring
The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the baby/toddler is displayed in subsequent weighings.
Put object (such as towel or padding) on the weighing pan.
0.5
0.0
Press
0
4.0
Put baby on the weighing pan/weighing plate.
MBB-BAPS-e-1710
The balance carry out a segment test, then the program
version is displayed.
The scales are ready for operation as soon as the weight
display for "0.0kg" has appeared.
button can be used to set the balance to zero at any
time.
plate.
result.
range, "Err" (overload) will appear on the display screen.
TARE
, the zero display appears.
Wait until the standstill display
weighing result.
ON
OFF
, then read the weighing
appears, then read the
21