Hold Function (Standstill Function) - KERN MBB 15K2DM Betriebsanleitung

 The balance is able to only store one taring value.
 When the balance is unloaded the saved taring value is
 To delete the stored tare value, release scales and press

11.3 Hold function (Standstill function)

The balance has an integrated standstill function (mean value calculation). This
allows correct weighing determination of a baby/toddler although the latter is not
keeping still on the scales.
0.0
 Start balance by pressing
0
HOLD
 Put baby/toddler in the centre of the weighing pan/plate.


2.3
 By pressing the
2.3
 Press the
There is no average value calculation in the event of too much
movement.
22
displayed with negative sign.
Wait for the rest position display
HOLD
Press
A triangle starts to flash in the display, during this time the
balance will record several measuring values and will then
display the calculated average value.
HOLD
returns to the normal weighing mode.
HOLD
button once more to repeat this function as
often as required.
ON
OFF
.
button several times, the balance
MBB-BAPS-e-1710
TARE
.