Relationship To The Authorities; Technical Data; Installation Requirements - SCAN DSA E 1000 Montageanleitung

Contents
1.0 Relationship to the authorities .................................................11
2.0 Technical data ...............................................................................11
3.0 Installation requirements ..........................................................11
4.0 Adaptation and setup ................................................................12
5.0 Installation ....................................................................................12
6.0 Once the stove has been installed ..........................................13
Figures ...................................................................................................17
1.0 Relationship to the
authorities
The insert should be installed in accordance with the Installation
and Operating Instructions for Scan DSA 10.
The installation of a fireplace must be carried out in compliance
with national laws and regulations. Your distributor can help you
to ensure that your fireplace is installed in compliance with legal
requirements and safety regulations.
Before the fireplace can be used, it must be inspected by a
qualified inspector. A qualified inspector may be a centrally-
approved company or an approved local-authority inspection
agency. It is always advisable to seek information from your local
planning and building office and professional help before starting
installation work.
The insert comes with installation and operating instructions.
The product may not be used until it has been inspected and
a certificate of completion has been issued. For day-to-day use,
maintenance, service work, etc. see the Installation and Operating
Instructions for the insert.

2.0 Technical data

The surround is designed for use with the SCAN DSA 10.
SCAN DSA E 1000 (fig. 3)
Weight: approx. 222 kg
Height: 1745 mm
Depth: 613 mm
3.0 Installation
requirements
3.1 Distance to inflammable material
See fig. 1.
3.2 Distance from surround to walls
If the wall behind the product is built up with the thickness of
a firewall, the surround can be positioned as illustrated in the
Installation and Operating Instructions for the Scan DSA 10. See
fig. 1 for safety distances.
3.2 Foundations
You need to make sure the floor is suitable for the entire
installation. See «2.0 Technical data» for specifications of weight
for the surround.
See the insert manual for the weight of the insert.
Remember: If a steel chimney
the weight of the steel chimney should be taken into account.
ENGLISH
resting on the insert is being used,
11