Environmental Protection; Control Elements; Colour Coding; Initial Start-Up - Kärcher PRO BR 400 Betriebsanleitung

Environmental protection

The packaging materials are re-
cyclable. Please do not throw
packaging in the domestic waste
but pass it on for recycling.
Old units contain valuable recy-
clable materials. Batteries, oil
and similar substances may not
be released into the environ-
ment. Therefore please dispose
of old units through suitable col-
lection systems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH

Control elements

Figure 1, see cover page
1 Handle
2 Water pump switch
3 Main switch for brushing/vacuuming op-
erations
4 Carrying handle
5 Support bow in waste water tank
6 waste water tank
7 Fresh water tank
8 Fresh water tank lock
9 Sieve
10 Cleaning head
11 Release, park position
12 Suction tube
13 Suction tube connection
14 Brush roller
15 Vacuum bar
16 Unlocking button for the changeable
brush
17 Cover waste water tank
18 Lock
19 Filling level display
20 Cable hook, rotating
21 Mains cable with mains plug

Colour coding

– The operating elements for the cleaning
process are yellow.
– The controls for the maintenance and
service are light gray.

Initial Start-Up

Figure 2, see cover page
 Insert tube into the opening of the appli-
ance at the end of the handle.
 Press down and slide the handle into
the appliance until it clicks.
 Align the cable in the appliance and at-
tach the lid as shown on the supple-
ment sheet.
Fill fresh water reservoir
CAUTION
Risk of damage. Only use the recommend-
ed detergents. With other detergents, the
operator bears the increased risk regarding
the operational safety, risk of accident and
reduced service life of the appliance. Only
use detergents that are free of solvents, hy-
drochloric acid and hydrofluoric acid.
Follow the safety instructions for using de-
tergents.
Note:
Do not use highly foaming detergents.
Observe the dosing notes.
Recommended detergents:
Application
Wipe care EXTRA RM 780
Floor shine cleaner
for all hard surfac-
es
Everday cleaner,
alkali-based
 Remove the fresh water reservoir from
the appliance.
 Open the cover of the fresh water reser-
voir.
 Pour in water/detergent mixture. Maxi-
mum temperature of the liquid 50 °C.
 Close the cover of the fresh water res-
ervoir.
 Insert the fresh water container into the
appliance.
– 2
EN

Operation

Detergent Concen-
tration
0,5 - 2,0%
RM 730 0,5 - 3,0%
RM 743 0,5 - 2,0%
11