Yamaha MU5 Bedienungsanleitung Seite 62

3.1.3 Channel Mode Messages
Channel Mode Messages are not transmitted.
3.1.4 RPN (Registered Parameter Number)
The RPN MSB and RPN LSB must be sent first for the desired parameter setting,
followed by the data entry values.
RPN
MSB LSB
$00 $00
$00 $01
$00 $02
3.2 Reception
3.2.1 Note ON/OFF
Receive note range
Velocity range
When Receive Note Message is set to OFF, reception is disabled. When drum part
data is received, the MU5 sometimes does not respond to Note Off messages
(depending on the transmitted instrument).
3.2.2 Control Change
The following control change parameters are applicable to the MU5:
Control #
0
32
1
6
38
7
10
11
64
84
100
101
Data Entry
MSB LSB
$mm -- Pitch bend sensitivity
mm : $00 – $18 (0 – 24 semitones)
"--" : Not used
Range is two octaves, selectable in one semitone
steps. When power is turned on, this is set to two
semitones.
$mm $l l Master fine tuning
(mm,l l) : ($00,$00) – ($40,$00) – ($7F,$7F)
(-8192x100/8192) – 0 – (+8192x100/8192 cents)
$mm -- Master coarse tuning
mm : $28 – $40 – $58 (-24 – 0 – +24 semitones)
"--" : Not used
= C-2 – G8
= 1 – 127 (Note On velocity only.)
Parameter
Bank select MSB
Bank select LSB
Modulation
Data entry MSB
Data entry LSB
Main volume
Pan
Expression
Hold 1
Portamento control
RPN LSB
RPN MSB
MIDI Data Format
Range
0 – 127
0
0 – 127
0 – 127
0 – 127
0 – 127
0 – 127
0 – 127
0 – 127
0 – 127
0 – 127
0 – 127
add-
11