Inhaltsverzeichnis
Werbung
en
Switching off and
disconnecting the
appliance
Switching off the appliance
Fig. 2
Press the On/Off switch 1.
Refrigerating unit switches off.
Disconnecting the
appliance
If the appliance is not used for
a prolonged period:
1. Pull out the mains plug
2. Cleaning the appliance
3. Leave the appliance door open
Cleaning the appliance
1. Attention: Pull out the mains plug
or switch off the fuse!
2. Wipe the door seal with clear water
only and then wipe dry thoroughly.
3. Clean the appliance with lukewarm
water and a little washing up liquid.
The water must not run into the fascia,
Fig. 1/2.
4. After cleaning: reconnect and switch
on the appliance.
Do not use abrasive or acidic cleaning
agents and solvents.
Regularly clean the condensation channel
and drainage hole, Fig. 3, so that the
condensation can flow out. Clean the
condensation channel with cotton buds,
etc.
20
Water used for cleaning must not run
through the drainage hole into the
evaporation pan.
Tips for saving energy
S Install the appliance in a dry, well
ventilated room, but not in direct
sunlight and not near a heat source
(e.g. radiator, cooker, etc.). If required,
use an insulating plate.
S Allow drinks to cool down before
placing in the appliance!
S Open and close the door as briefly
as possible.
Operating noises
Completely normal noises
Humming noise - refrigerating unit is
running.
Bubbling, whirring or gurgling noises -
refrigerant is flowing through the
refrigeration tubing.
Clicking noise - motor is switching on or
off.
Noises which can easily be
eliminated
The appliance is not standing level
Please use a spirit level to ensure that the
appliance is standing level. Adjust the
threaded feet or place something
underneath to bring the appliance level.
The appliance is crowded
Please leave clearance between the
appliance and surrounding furniture
or appliances.
Werbung
Inhaltsverzeichnis
