Gardens Best GB 250 KP Handbuch Seite 20

Commissioning
Connect the hose (fig. C and D). Screw the supplied accessories on the pump as shown
in fig. A. A hose (32 mm, 25 mm, 19 mm and 13 mm) can be connected to the universal
hose coupling. 32 mm hoses are connected to the universal hose coupling of the pump
with the help of the connecting pieces. The 19 mm and 13 mm hoses are connected with
the help of special connecting pieces (fig. C). We recommend securing the 32 mm and
25 mm hoses with hose clamps.
Fig. A Fig. C Fig. D
Individual parts of the universal hose coupling that are not required (e.g. for 32 mm
hoses) can be cut off of the universal hose coupling with a knife (fig. D). Optimum results
are achieved with a 32 mm hose.
Attention: A spiral hose reduces the delivery height and delivery rate substantially. Only
use straight hoses!
The on and off heights may vary. The stated values are average values and no longer
correct if the float switch is not attached to the catch of the float switch (3).
Use/application fields
The electric immersion pumps are applied for the following tasks:
• Draining cisterns, rainwater reservoirs, wells, ponds, swimming pools and drains
• Draining of flooded basements, boats and yachts
• For aeration and water circulation
Use/liquid to be pumped out
• Clear, slightly cloudy and dirty water (depending on the pump type!)
19
BDA Tauchpumpen.indd 19 15.11.12 19:31